Motorcycle frame

Motorcycle frame

A motorcycle frame includes the head tube that holds the front fork and allows it to pivot. Some motorcycles include the engine as a load-bearing, stressed member. The rear suspension is an integral component in the design. Traditionally frames have been steel, but titanium, aluminium, magnesium, and carbon-fibre, along with composites of these materials, have been used. Because of different motorcycles' varying needs of cost, complexity, weight distribution, stiffness, power output and speed, there is no single ideal frame design.[1]


Contents

Frame materials

Steel

Examples

Aluminium

Examples
  • Honda VFR750

Aluminium and carbon-fibre

Examples
  • Bimota SB8K (composed of two aluminium alloy beams and carbon fibre plates)

Carbon fibre

Titanium

Examples

Magnesium

Elf 5 at the Honda Collection Hall
Examples

Magnesium and aluminium

Examples

Frame Types

Pressed frame

The frame is mass-produced by sheet metal pressed or stamped into shape. Typically a single-cradle structure is used.

Examples

Single cradle

The motorcycle engine is held in a single cradle with a single spine.

Half-duplex cradle frame

The motorcycle engine is held in a double cradle with a single spine and single downtube.

Examples

Full duplex cradle frame

The motorcycle engine is held in a full by two separate cradles, normally with a single spine.

Examples
Double cradle frame on Honda CB750

Double cradle or perimeter frame

Two cradles follow the perimeter

Examples

Spine or backbone frame

The motorcycle engine is suspended from a single spine.

Examples


Frame of a 2011 Kawasaki ZX-10R.
Aluminum beam frame on Buell Lightning.

Beam

Twin beams join headstock to swingarm pivot in as straight and short a line as possible.

Examples

Monocoque

Supports structural load using the external skin of the frame.

1944 Piaggio MP5 monocoque chassis.
Examples


Steel trellis frame (red) on a Ducati Monster 1000. The engine is a stressed member.

Trellis

Similar to the beam frame, connecting the steering head and swingarm pivot point directly as possible. The frame is made up of a large number of short steel (or aluminium) tubes welded together to form a trellis.

Examples

Engine as a stressed member

For rider comfort, a motorcycle's engine can be mounted on rubber bushings to isolate vibration from the rest of the machine. This strategy means the engine contributes little to frame stiffness, and absorbing rather than dissipating vibration can lead to stress damage to the frame, exhaust pipes, and other parts.[1]

Instead, if the engine is rigidly mounted to the frame, vibrations pass to and are dissipated via the whole frame, and the rider. Rigid mounting allows the engine to contribute to the overall stiffness of the frame. It also becomes possible to mount the swingarm directly to the engine rather than the frame, avoiding the need for frame members extending downward to the swingarm pivot. By increasing the number of mounting points between the engine and frame, vibrations and stress can be better dissipated in the frame, typically creating a triangle between the swingarm in the rear, the cylinder head at the top and the lower crankcase area at the front. If a rigidly mounted engine not only contributes to, but is critical to, the stiffness of the frame, and is an integral part of closing the triangle or trellis structure that transfers force from the headstock to the swingarm, to the point that without the engine the frame would be deformed, the engine is called a stressed member, or a lifted engine. Sharing the load between the engine and frame reduces the overall weight of the motorcycle.[1]

During early testing of the 1983 Kawasaki GPZ900R, twin downtubes were included, creating a full cradle, but the downtubes were found to carry little load, so they were removed, relying entirely on the combination of the steel backbone and engine for chassis rigidity.[4] BMW's R1100 series twins of 1994 relieved the frame of stress entirely, with the engine carrying the total load from the front Telever fork to the rear Monolever.[5][6]

See also

Notes

  1. ^ a b c Cocco, Gaetano (2004), Motorcycle Design and Technology, Saint Paul, Minnesota: Motorbooks Workshop/MBI, pp. 119–132, ISBN 0760319901, http://books.google.com/books?id=Ydk0bgq2_3YC&pg=PA119, retrieved 2011-02-26 
  2. ^ "1971 Titanium Husqvarna; A bike as trick as they got", American Motorcyclist (Westerville, Ohio: American Motorcyclist Association) 60 (11): 75, November 2006, ISSN 0277-9358, http://books.google.com/books?id=tPUDAAAAMBAJ&pg=PA75, retrieved 2011-02-26 
  3. ^ Cathcart, Alan (January 2008), "ELF Racing - ELF Motorcycle Chassis Designs - Retrospective;Tracing A Decade Of Radical Racebike Experimentation", Motorcyclist: 50(6), ISSN 0027-2205, http://motorcyclist.automotive.com/75816/122-0801-elf-racing-motorcycle-chassis-design/index.html, retrieved 2011-02-26 
  4. ^ Walker, Mick (2006), Motorcycle: Evolution, Design, Passion, Johns Hopkins University Press, pp. 174–175, ISBN 0801885302 
  5. ^ Stermer, Bill (2006), Streetbikes: Everything You Need to Know, Saint Paul, Minnesota: Motorbooks Workshop/MBI, p. 155, ISBN 0760323623, http://books.google.com/books?id=NMokiWY6E00C&pg=PA155, retrieved 2011-02-26 
  6. ^ Coombs, Matthew; Shoemark, Pete (2002), Motorcycle Basics Techbook (2nd ed.), Haynes Manuals, p. 9.6, ISBN 9781859605158 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Motorcycle frame slider — Motorcycle frame sliders are an optional tool used on street motorcycles for the purpose of maintaining the bike s side fairings and internal components in the event of a crash or preventing damage from dumping (dropping) the bike. The frame… …   Wikipedia

  • Motorcycle components — and systems for a motorcycle are engineered, manufactured, and assembled in order to produce motorcycle models with the desired performance, aesthetics, and cost. The key components of modern motorcycles are presented below. Contents 1 Chassis… …   Wikipedia

  • motorcycle — motorcyclist /moh teuhr suy klist/, n. /moh teuhr suy keuhl/, n., v., motorcycled, motorcycling. n. 1. a motor vehicle similar to a bicycle but usually larger and heavier, chiefly for one rider but sometimes having two saddles or an attached… …   Universalium

  • Motorcycle construction — is the engineering, manufacturing, and assembly of components and systems for a motorcycle which results in the desired performance, cost and aesthetics. Construction of modern motorcycles has standardized on the key components listed… …   Wikipedia

  • Motorcycle accessories — are features and accessories selected by a motorcycle owner to enhance safety, performance, or comfort, and may include anything from mobile electronics to sidecars and trailers. An accessory may be added at the factory by the original equipment… …   Wikipedia

  • Motorcycle speedway — A speedway rider on the track Highest governing body Fédération Internationale de Motocyclisme Nickname(s) Speedway First pla …   Wikipedia

  • Motorcycle fork — 1968 BMW R60US with conventional telescopic fork Unusual trailing bottom …   Wikipedia

  • Motorcycle stunt riding — Motorcycle stunt riding, sometimes referred to as simply stuntriding, is a motorcycle sport characterized by stunts involving acrobatic maneuvering of the motorcycle and sometimes the rider. Common maneuvers in stunt riding include wheelies,… …   Wikipedia

  • Motorcycle engine — A Honda Super Cub engine. The most popular motorcycle in history, with over 60 million produced …   Wikipedia

  • Motorcycle fairing — This article is about motorcycle design. For other uses of fairing , see Fairing (disambiguation). 1956 NSU world record setting Dolphin II …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”