tension buckling
1Buckling — In engineering, buckling is a failure mode characterized by a sudden failure of a structural member subjected to high compressive stresses, where the actual compressive stress at the point of failure is less than the ultimate compressive stresses …
2Structural engineering — is a field of engineering dealing with the analysis and design of structures that support or resist loads. Structural engineering is usually considered a speciality within civil engineering, but it can also be studied in its own right. [cite… …
3solids, mechanics of — ▪ physics Introduction science concerned with the stressing (stress), deformation (deformation and flow), and failure of solid materials and structures. What, then, is a solid? Any material, fluid or solid, can support normal forces.… …
4Cold formed steel — (CFS) is the common term for products made by rolling or pressing thin gauges of sheet steel into goods. Cold formed steel goods are created by the working of sheet steel using stamping, rolling, or presses to deform the sheet into a usable… …
5Steel plate shear wall — A steel plate shear wall (SPSW) consists of steel infill plates bounded by a column beam system. Overview When these infill plates occupy each level within a framed bay of a structure, they constitute an SPSW [Kharrazi, M.H.K., 2005, “Rational… …
6Truss — For other uses, see Truss (disambiguation). In architecture and structural engineering, a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints referred to as nodes.… …
7building construction — Techniques and industry involved in the assembly and erection of structures. Early humans built primarily for shelter, using simple methods. Building materials came from the land, and fabrication was dictated by the limits of the materials and… …
8Truss bridge — for a single track railway, converted to pedestrian use and pipeline support Ancestor Beam bridge[ …
9Compressive strength — is the capacity of a material or structure to withstand axially directed pushing forces. When the limit of compressive strength is reached, materials are crushed. Concrete can be made to have high compressive strength, e.g. many concrete… …
10Strength of materials — Internal force lines are denser near the hole, a common stress concentration In materials science, the strength of a material is its ability to withstand an applied stress without failure. The applied stress may be tensile, compressive, or shear …
