Axe ties

Axe ties

Axe ties are railway ties that are hewn by hand, usually with a broadaxe. There are 2,900 ties per mile of track on a first class railroad. The early railways would not accept ties cut with a saw, as it was claimed that the kerf of the saw, splintered the fibres of the wood, leaving them more likely to soak up moisture causing premature rot. Cedar was the most sought after wood for ties, however, as electric power came into more common use in the early 1900's, it was substituted with other species such as Tamarack. In northern regions where Jack Pine was plentiful, that species became a more source for railway ties. Jack Pine ties didn't last as long as Cedar or Tamarack (lying on the ground), but were cheaper to produce. As creosote treatment came into use the axe ties were phased out, but Jack Pine remained best suited for softwood ties.

See Category: Communities in Ontario Foleyet and Nemegos. Axe tie production was an early industry of importance for many of these communities along the railway in the early 1900's.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Gogama, Ontario — Infobox City official name = Gogama other name = native name = nickname = motto = imagesize = image caption = Railstop and HBC store in Gogama flag size = image seal size = image shield = shield size = image blank emblem = blank emblem size =… …   Wikipedia

  • Railroad tie — While wooden ties dominate North American railways, concrete is widely used in other parts of the world. A railroad tie/railway tie (North America), or railway sleeper (Europe) is a rectangular item used to support the rails in railroad tracks.… …   Wikipedia

  • Track (rail transport) — Permanent way redirects here. For other uses, see Permanent way (disambiguation). Twin rail tracks in a wooded area …   Wikipedia

  • Rail fastening system — Elements of a baseplate based rail fastening system 1. Screw for fixing plate to sleeper 2. Elastomeric pad supporting rail 3. Tension washer 4. Rail clamp 5. Tensioning bolt (nut not shown) 6. Baseplate …   Wikipedia

  • Broadaxe — A broadaxe is a large headed axe. Usually one side is flat and the other side beveled, though sometimes both sides are beveled. With one bevel the handle may curve away from the flat side to allow a flush stroke when hewing a flat plane on a… …   Wikipedia

  • Datenail — A 31 Datenail Datenails were tagging devices utilized by railroads to visually identify the age of a railroad tie. Different railroads used different sized nails with either alpha or numerical markings. An example would be a Southern Pacific… …   Wikipedia

  • Train station — Rail transport Operations Track Maintenance High speed Gauge Stations …   Wikipedia

  • Railroad switch — For other uses, see Switch (disambiguation). A right hand railroad switch with point indicator pointing to right …   Wikipedia

  • Overhead lines — This article is about the transmission of electrical power to road and rail vehicles. For transmission of bulk electrical power to general consumers, see Electric power transmission. For powerlines mounted on pylons, see overhead power line.… …   Wikipedia

  • Level crossing — This article is about at grade intersections between railway and road. For where two rail lines cross, see level junction. For a type of nuclear receptor (RXR), see Retinoid X receptor. A level crossing at Chertsey, England, as the barriers rise …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”